VPS 및 전용 서버(호스팅 컨트롤 센터) 도움말

Configuring IPs in Plesk with a Hardware Firewall

Follow these instructions to configure IP addresses in Plesk with a hardware firewall. Once you have the IPs configured, you can use a DNS lookup tool to verify your settings.

To Configure IPs in Plesk 10.2 with a Hardware Firewall

  1. Log in to Plesk. For more information, see Log in to my server.
  2. From the Tools & Utilities menu, click IP Addresses.
  3. Click Add IP Address, and then enter the appropriate internal IP address translation matching the recently configured NAT rule of the hardware firewall. For more information, see Configuring Cisco ASA 5505 Firewall NAT Rules and Interfaces.
  4. Click OK.
  5. Click Subscriptions.
  6. Click the domain name you need to change.
  7. Click Change Hosting Settings.
  8. Write down the IP you are changing from, and then select the 10.0.0.x address from the IP drop-down list.
  9. Click OK.
  10. From the left side bar, click Domains.
  11. Click Open Control Panel to the right of the domain name you want to update.
  12. Click Websites & Domains.
  13. Click DNS Settings.
  14. Replace all instances of the 10.0.0.x address with the IP address you previously wrote down.
  15. Click Update.

To Configure IPs in Plesk 10.4.4 & 11 with a Hardware Firewall

  1. Log in to Plesk. For more information, see Log in to my server.
  2. From the Server tab, click IP Addresses.
  3. Click Add IP Address, and then enter the appropriate internal IP address translation matching the recently configured NAT rule of the hardware firewall. For more information, see Configuring Cisco ASA 5505 Firewall NAT Rules and Interfaces.
  4. If you are using this IP for an SSL, select Dedicated; otherwise, select Shared.
  5. Click OK.
  6. Click Websites & Domains, and then click Web hosting Access.
  7. Write down the IP you are changing from, and then select the 10.0.0.x address from the IP drop-down list.
  8. Click OK.

    Note: If your DNS is not hosted on this server, the IP configuration is now complete. If you are hosting DNS on this server, continue with these steps.

  9. Click DNS Settings and replace all instances of the 10.0.0.x address with the IP address you previously wrote down.
  10. Click Update.

이 글이 도움되었나요?
피드백을 보내주셔서 감사합니다. 고객 서비스 담당자에게 문의하시려면 지원 전화 번호 또는 위의 채팅 옵션을 이용하시기 바랍니다.
도와드릴 수 있어 기쁩니다! 더 도와 드릴 것이 있나요?
그것 유감스럽습니다. 혼동이 되었던 사항 또는 솔루션이 고객님의 문제를 해결하지 못했던 원인을 알려주세요.